JYS JYS0006 Charging Dock for Meta/Oculus Quest 2 Accessories Magnetic Charging Station for VR Headset and Controllers with 2 Rechargeable 1800mAh Batteries and USB-C Charge Cable

【Packaging list】:
Charging dock X1, battery X2, battery cover X2, USB Type C magnetic suction head X4, magnetic suction head removal pin X1, 1.2-meter charging cable X1, user manual X1

Required charger output: 5V>2A
1. When the charging dock is equipped with a VR helmet and two handles charging simultaneously, in order to provide sufficient current, it is necessary to equip the charging dock with a charger with an output of 5V2A or higher
2. The original charger included in the 0culusQuest2 package is suitable for this charging dock

【Steps for helmet charging】:
1. Connect a 5V2A or higher charger to the charging dock (charger not included in this package, customer needs to purchase separately). The charging dock will light up green and enter standby mode when powered on
2. Insert the Type-C magnetic suction head into the charging hole of the helmet
3. Place the helmet vertically into the corresponding charging position of the charging dock, and at the beginning of charging, The LED indicator light of the seat charger is yellow

【Steps for charging the controller】:
1. Connect a 5V2A or higher charger to the charging dock (not included in this package, customers need to purchase it separately). The charging dock will light up green and enter the power on standby mode
2. Slide the battery cover of the handle downwards and remove the battery cover
3. To install the battery on the controller, please make sure that the Type-C charging port of the battery is facing upwards as much as possible during installation
4. Install the battery cover provided in this package onto the handle
5. Adjust the Type-C charging port of the battery to align with the hole on the battery cover using the needle provided in this package
6. Insert the magnetic suction head into the Type-C charging port of the battery through the hole on the battery cover
7. Place the handle into the corresponding charging position of the charging dock to allow the magnetic suction head to come into contact for charging

At the beginning, the LED indicator light of the seat charger will turn yellow (please note that the handle has a left and right distinction, please place the handle according to the "L" and "R" markings on the seat charger)
If you want to remove the magnetic suction head of the handle, please use the needle provided in the packaging to remove the magnetic suction head

【Specifications】:
*Battery type: Polymer lithium battery
*Battery capacity: 1800mAh
*Handle battery usage time: approximately 36 hours
*Charging current: Helmet: maximum 1.4A Handle: maximum 500mA
*Charging time: Helmet: approximately 3.5 hours Handle: approximately 2.5 hours

【Seat charging indicator light】
*Standby mode: green light
*Charging: yellow light
*Full: Green light
*Compatible with third-party headsets