SVBONY TWM1 SV305M Pro Astronomy Camera, 2MP USB3.0 Telescope Camera, 1.25 Inches Monochrome Camera and Guide Camera for Astrophotography

1/2.8”COMS Monochrome Sensor With IMX290 monochrome sensor, 1/2.8 inch frame, pixel size 2.9um, resolution 1944*1096 pixels, diagonal length 6.46mm, provide low read noise, high dynamic range, high frame rate, 12bit ADC output Support Any BIN 1*1 or BIN 2*2 The product has a pixel merging function and can shoot in BIN2, which greatly improves the sensitivity of the camera. Support Any Area ROI SV305M Pro has an ROI function, which can "cut" the imaging area and customize the resolution. For planetary shooting "lucky imaging", it can greatly increase the frame rate Guide function SV305M Pro has a pixel size of 2.9μm and a higher sampling accuracy, which means that it can detect more subtle star movement. high-precision and very good guiding product. SV305M Pro is equipped with ST4 guide star interface, which can be connected to the Auto Guide port of the equatorial mount with a guide star cable for automatic guide.Supports PHD2 guide star software. About the compatibility SV305M Pro is a 7.5mm/12.5mm rear intercept, a 1.25-inches interface is connected to the telescope, and two specifications of 5mm and 20mm are provided. The extension barrel is directly connected to a 1.25-inches filter. In addition, the camera's CS thread interface can be directly connected to a CS lens or CS-C. the C-mount lens can be used to directly watch after the ring is connected.

• Get a sharp image; uses an extremely sensitive CMOS monochrome sensor; the IMX290LLR-C; which has very high QE (80%); very low readout noise (1.0-3.2e); pixel size 2.9um; 1944*1096 pixels resolution; 6.46mm diagonal
• Has a stable transmission; built-in 128MB DDRII image buffer; cache the image and transfer it to the computer when the USB interface is not busy or being interrupted; get a sound frame; allows a slower computer with USB 3.0; to capture every frame without loss; could run another camera using the same computer; without USB transfer problems from the SV305M Pro
• Improve camera sensitivity; has ROI and BIN functions; any resolution can be set; could read a smaller region of interest (ROI) out from the sensor; leaving the image scale of the object being imaged unchanged; greatly increase the camera rate; BIN2*2 pixel can merge two adjacent pixels; which can improve camera sensitivity
• Can automatically guide; designed with ST4 guiding port; supported by PHD2 and the ASCOM platform; use the computer to control the telescope; has an auto-guiding port; which connects directly to the auto-guider; which usually referred as an ST-4 port; works with analog signals
• Good transformation performance; using USB3.0 high speed data transmission; quick and efficient for planetary imaging